Conejo Services - Internal Map of California

50- Gallon Bradford White Water Heter InstallSold by Jeff Stone

SCOPE OF WORK (Local & California Plumbing Codes included for reference):

 - Installation of new water heater at existing water heater location.

 - Connect existing exhaust vent to water heater vent hood; ensure vent is supported, if needed, and all vent connections are fastened w/ 3 vent screws (CPC 503.3) *Price is subject to change if additional materials/modifications are required*

 - Installation of a new brass water shut off valve on the cold water line (if needed) (CPC 606.2)

 - Installation of new 3/4” dielectric stainless steel flexible connectors on the cold & hot water lines.

 - Insulate up to 5ft of the cold & hot water lines (not required in a conditioned space) (150 (J) 2)

 - Installation of a 2.1 gal. thermal expansion tank; secured/fixed to wall (CPC 608.2 & 3)

 - Installation of brass electrical bonding clamps on the cold water line, hot water line & gas line, connecting all 3 brass bonding clamps using 6 gauge copper wire to aid in the prevention of electrolysis (not required on PEX plumbing systems) (250-104 a,b)

 - Installation of uni-strut system & seismic straps (upper & lower) to prevent horizontal displacement in the event of an earthquake (CPC 507.2)

 - Installation of a new temperature & pressure relief valve (CPC 608.5)

 - Connect to existing drain line for temperature and pressure relief drain; ensure drain line is terminating at an approved location (CPC 608.5) *Price is subject to change if additional materials/modifications are required*

 - Installation of a new 1/2” brass gas shut off valve, 1/2” gas sediment/debris trap & 1/2” x 24” flexible powder coated stainless steel gas connector (CPC 1211.5 / 1212.8)

 - Installation of an aluminum drain pan beneath water heater (CPC 507.5)

 - Installation of up to 5ft of 3/4” PVC drain line from the aluminum drain pan to an approved location (CPC 507.5) *Price is subject to change if additional materials/modifications are required*

 - Cover existing water heater stand w/ sheet metal & angle iron (if applicable)

Amount to collect when done: $3,505.00

Please call Charles when on the way 3104873343

Install

Sales- Greg

Turn-Georgie F

Upflow xv-80 furnace, coil, XR14 A/C, ducting (7-8 runs)

Total - $19,084.00 (Wells Fargo, 72 months no interest)

**Customer wanted this date

Install **PRE 7AM. **TENANT NEEDED THIS DATE

Sales- kevin

Turn- N/A

Two RA14 A/C's. (1) upflow coil (for upstairs)

Total - $12,480.00 **PER KEVIN; MARISA TO CONTACT REALTOR FOR PAYMENT (JILL)