Conejo Services - Internal Map of California

Install

Sales- Greg Jamroz

Turn- N/A

Upflow furnace, coil, A/C.

Total- $9,000.00 *Financing - Wells Fargo 12 months/no interest*

Sales: Tony / DO NOT MOVETasks:

Leak Detection:

1. Use acoustic detector to confirm slab leak location.

2. Identify affected line (hot or cold) and plan reroute path.

3. Shut off main water supply to home.

Planning and Preparation:

1. Map new pipe route through walls, attic, or crawlspace.

2. Set up work area with drop cloths and tools (PEX crimper, pipe cutter).

3. Obtain client approval for access points.

Pipe Rerouting:

1. Install new PEX or copper line (1/2-inch or 3/4-inch) along planned route.

2. Connect new line to existing system with manifolds or fittings.

3. Cap or isolate leaking slab line to prevent future use.

Testing:

1. Turn on water supply and pressure-test new line for leaks.

2. Run water through fixtures to verify flow and pressure.

3. Inspect all connections with leak detector solution.

Cleanup and Final Steps:

1. Wipe down work areas and remove debris.

2. Dispose of materials per local regulations.

3. Conduct client walkthrough to demonstrate functionality.Cost: $2,689.00

Install **CRANE ARRIVAL - 9AM. WILLINGHAM CRANE

Sales- Brice daly

Turn- Ralph Ortiz

Roof top A/C, coil, ducting.

Total- $13,040.00 (CC or check, homeowner to decide) (reducing due to paying for inspection but then moving forward with installation)

AMOUNT DUE NOW - $11,090.00

AMOUNT DUE ONCE CHANGE ORDER WORK IS COMPLETED - $1,950.00