Take a look at our past work!

Tear off 2 days Friday Inspection/material load.

Installation **NEED TO BE DONE BY 430

Sales- Greg

Turn- N/A

4TON upflow BVA20 air handler, BOVB20 heat pump, NUVE thermostat*ELECTRICAL NEEDED

Total due - $19,000.00 *ACCT TO CALL FOR CC*

***NOTE; CUSTOMER WOULD LIKE TO DISCUSS OPTIONS FOR TROUBLESHOOTING WINE CELLAR/RUNNING NEW CIRCUIT.

Sales- Greg Jamroz

Panel upgrade to 200a.

total due - $6,000.00 (CC or CHECK)

**TWO DAY PROJECT 11/18 + 11/21

Sales- Brice

Turn N/A

Run power for the mini split installed, replace garage sub panel to 100a,

Install (7) kitchen duplex outlets/GFI, move bathroom GFI, Run power to induction cook up in kitchen, microwave, counter top back splash, mini fridge, disposal garage, add

(2) new in family room.

Total for this portion - $7,753.00 (CC or CHECK)

Installation

Sales- Brice

Turn- Jimmy

Add on single-head mini split.*Please note, will not be able to test run/turn on units, due to electrical work needing to take place.

$7,500.00 for this portion (CHECK)

Sales- Jimmy**Krista has showerhead in her office**

Rough in Plumbing for Kitchen & Bathroom

Work to be comoleted

Drains:

Move onower drain.

Add kitchen drain to shower or vanity drain and reconnect to bathroom vent.

Water:

Repipe entire bathroom with upunor pex pipe and fittings with copper stub outs for vanity and toilet.

Provide and install shower valve.

Plumb hot and cold from the bathroom to the kitchen location in upunor pex pipe and fittings with copper stub outs.

Properly clamp the system.

Install hot insulation.

Test work for proper seal.

Open up drywall and cap the outdoor shower down stairs.

Set Finish

tall customer provided toilet, bathroom faucet, kitchen faucet, and garbage disposal provided and install qtr turn angle stops, stainless braided steel supplies, tubular p traps, and shower trim.

Conejo home services cannot be held responsible for any type of damage to structure of home, Drywall, stucco, flooring, concrete, painting, existing plumbing fixtures, or texture.

CC or check $7225.00

SLAB LEAK REROUTE

Sold by Tony

Slab Leak Reroute

Reroute water lines to bypass a slab leak in a residential or commercial property, avoiding costly and invasive slab excavation while restoring water system functionality and preventing further damage. Slab leaks, often caused by pipe corrosion or ground movement, can lead to water loss, high utility bills, and structural issues like foundation cracks or mold. This process involves identifying the leak with electronic detection, isolating the affected pipe, and installing new copper or PEX piping through alternative routes (e.g., walls, ceilings, or crawlspaces) to restore water flow. The reroute eliminates the need to repair the slab-embedded pipe, offering a cost-effective and less disruptive solution. Note that Conejo does not repair or replace drywall, paint, or stucco, so any wall penetrations or cosmetic repairs must be handled by the client or a separate contractor.

Location: Interior/Exterior (Alternate Routing Path)

Tasks:

Preparation:

1. Locate slab leak using electronic leak detection equipment (e.g., acoustic or infrared tools).

2. Shut off main water supply and isolate affected piping to prevent water loss.

3. Plan reroute path (e.g., through walls, attic, or crawlspace) and set up work area with tools (pipe cutter, fittings, PPE).

Pipe Rerouting:

1. Install new copper or PEX piping along the planned reroute path, avoiding the slab leak.

2. Connect new line to existing water supply and fixtures using appropriate fittings (e.g., tees, couplings).

3. Secure piping with hangers or clips every 4-6 feet to prevent movement, per code.

System Integration:

1. Cap or isolate the leaking slab pipe to prevent future use, ensuring no pressure loss.

2. Integrate new piping with existing system, maintaining water pressure (40-80 psi).

3. Ensure rerouted lines are accessible for future maintenance and avoid structural obstructions.

Testing:

1. Restore water supply and perform pressure test to confirm no leaks in rerouted lines.

2. Run water through fixtures to verify normal flow and no cold water mixing.

3. Inspect all connections for leaks using a pressure test or visual inspection.

Cleanup and Final Steps:

1. Clean work area and dispose of debris per local regulations.

2. Provide client with reroute layout and maintenance instructions.

3. Conduct walkthrough to demonstrate restored water flow and explain limitations.

Notes:

- Bypasses slab leaks to restore water flow without invasive slab excavation.

- Conejo does not repair or replace drywall, paint, or stucco; client responsible for cosmetic repairs.

- Additional piping or complex rerouting quoted separately if needed.

- Advise client to monitor water bills and new piping for signs of leaks.

- Estimate valid for 60 days from issuance

- Includes permit fees (if required)

- Unforeseen issues or additional work will be quoted separately with client approval

- Exclusions: Drywall, paint, stucco, tile, concrete, stone repairs, or existing water damage

- Duration: 6-8 hours, 2 technicians

- Warranty: 5 years parts, 2 years labor

- Financing: 18 months at 0% interest available

Amount to collect when done $5,811.00Please call 8183712017