Take a look at our past work!

Install

Sales- Greg

Turn- Ralph

Add on mini split (single head), 50 gallon water heater

Deposit; $1,000.00 (Visa)

Total due: $9,300.00 (Ask homeowner if they would like to use same Visa, or check)

Install **PLEASE HAVE HOMEOWNER SIGN FINANCING FORMS**

Sales- Greg

Turn- Ralph

U/S - Horizontal R802VA, coil, BOVB18 condenser

D/S - Horizontal R802VA, coil, BOVB18 condenser

Total - $32,000.00 *Financing; Synchrony*

Install

Sales- Greg

Turn- N/A

Horizontal R802VA furnace, coil, Bosch BOVB18 A/C, duct sealing.

Deposit: $1,000.00 (check)

Total due: $15,500.00 (check)

Sales: JohnReplacement of an existing 40-gallon gas water heater in a garage with no recirculation pump. Connect Watts 210 gas T&P valve and piping.

Location: hallway closet

Recirculation Pump: No

Tasks:

Preparation and Shutoff:

1. Shut off gas supply valve

2. Close main water supply

3. Drain existing water heater to empty tank

Removal of Existing Unit:

1. Disconnect gas line from heater

2. Detach cold and hot water supply lines

3. Remove and dispose of old unit per local regulations

New Water Heater Installation:

1. Position new 40-gallon unit with adequate clearance per code

2. Install new drain pan beneath unit

3. Connect new stainless steel water supply lines (cold and hot)

4. Install 1/4-turn ball valve on cold water inlet

5. Install expansion tank, adjusted to home water pressure (typically 50-60 PSI)

6. Fit new gas shutoff valve on gas line

7. Attach new flexible gas supply line with sediment trap

8. Secure unit with Unistrut mounting and earthquake straps

9. Reconnect to existing Watts 210 T&P valve

10. Insulate water supply lines for efficiency

11. Install copper bonding wire from water lines to gas line for grounding

12. Cover base/stand with sheet metal for protection

Venting and Combustion:

1. Install venting per manufacturer’s specs (e.g., double-wall or single-wall as required)

2. Secure single-wall vent connections with 3 screws each

3. Verify adequate combustion air supply per code

Testing and Startup:

1. Pressure-test gas and water connections for leaks

2. Fill tank and purge air from lines

4. Light pilot, set temperature to 120°F (or per client preference), and confirm burner ignition

5. Validate full operational status

Cleanup and Final Steps:

1. Clear debris from work area

2. Haul away old unit for disposal

3. Conduct final inspection with client walkthroughCollect: $3,832.00

Confirmed with Terre 818-470-0587 who will be on site 05/21

Installation

Sales- Brice

Turn- Dakota3TON Upflow R801 furnace, coil, BOAVA15 A/CDeposit - $1,000.00 (check)

Total due - $15,658.00 (check)

Installation

Sales- Greg

Turn- Dan

5TON Horizontal R802VA furnace ,coil, BOVA15 A/C, ducting 10-11 runs, zoning, CleanEffects, (2) Honeywell #T6

Financing - $30,000.00 *7.99 fixed Synchrony*

Collet check - $4,550.00