Take a look at our past work!

Sales-StacieReplace existing tank water heater with new Bradford white 50 gallon tank water heater in garage location.

Install new stainless steel water heater flex connectors.

Install new ball valve shut off.

Install new 2.1 gallon thermal expansion tank.

Install new temperature/pressure relief valve and drain to exterior.

Install new water heater earthquake strapping.

Install new unistrut mounting system.

Install new gas shut off valve, gas flex, and sediment trap.

Install new sheet metal base and front on stand.

Install new water heater drip pan.

City permits included.

Replacement of shower cartridge in both master shower and hallway guest shower.

0% 18 months no terms financing is available.

Conejo 3 year parts/labor warranty.

Manufacturer 6 year parts/tank warranty. 10 year warranty available within 30 days of purchase.

Conejo does not warranty existing customer equipment, fixtures, or piping systems.

Conejo does not repair or replace damaged drywall, paint, stucco, or existing water damage nor are they included in this estimate.

CC or check $$4,312.20

Sales-Bill**Please send Krista water heater label or upload to acct**

Drain and remove existing heater

Clean and prep area

Install backing, grounding, and straps

Install sheet metal and edging

Install new 10 year50 gal Bradford to todays code requirements

Use existing venting

Use existing T&P line

10 year manufacturer warranty on tank

6year manufacturer warranty on parts and labor

CVHS provides a 3 year warranty on part and labor

Pricing includes all taxes and permits

Test and light heater

Haul away all trash and debris

18 month 0% financing available

CC or Check $3500.00

Sales-Jimmy

Conejo home services will install a 75 gallon Bradford white water heater located in garage.

Drain and remove the old water heater.

Install a new 75 gallon water heater.

Install a new drain pan.

Sheetmetal the base.

Install a new gas flex connector, water connectors, supply ball valve shut-off and quake strap.

Install expansion tank at supply line of water.

Hook T&P valve up to existing copper line.

Tax and permits are included in the price of cost.

6 year tank 6 year parts and 1 year labor warranty

CC or check $5378.00

Sales-Nick50-Gallon Gas Water Heater Replacement

Replacement of an existing 50-gallon gas water heater in a garage with comfort series pump.

Location: Garage

Recirculation Pump: No

Tasks:

Preparation and Shutoff:

1. Shut off gas supply valve

2. Close main water supply

3. Drain existing water heater to empty tank

Removal of Existing Unit:

1. Disconnect gas line from heater

2. Detach cold and hot water supply lines

3. Remove and dispose of old unit per local regulations

New Water Heater Installation:

1. Position new 50-gallon unit with adequate clearance per code

2. Install new drain pan beneath unit

3. Connect new stainless steel water supply lines (cold and hot)

4. Install 1/4-turn ball valve on cold water inlet

5. Install expansion tank, adjusted to home water pressure (typically 50-60 PSI)

6. Fit new gas shutoff valve on gas line

7. Attach new flexible gas supply line with sediment trap

8. Secure unit with Unistrut mounting and earthquake straps

9. Reconnect to existing T&P relief valve exit point

10. Insulate water supply lines for efficiency

11. Install copper bonding wire from water lines to gas line for grounding

12. Cover base/stand with sheet metal for protection

13. Needs new metal water heater stand

Venting and Combustion:

1. Install venting per manufacturer's specs (e.g., double-wall or single-wall as required)

2. Secure single-wall vent connections with 3 screws each

3. Verify adequate combustion air supply per code

Testing and Startup:

1. Pressure-test gas and water connections for leaks

2. Fill tank and purge air from lines

3. Test T&P relief valve operation

4. Light pilot, set temperature to 120°F (or per client preference), and confirm burner ignition

5. Validate full operational status

Cleanup and Final Steps:

1. Clear debris from work area

2. Haul away old unit for disposal

3. Conduct final inspection with client walkthrough

Notes:

- Estimate valid for 60 days from issuance

- Includes permit fees (if required)

- Unforeseen issues or additional work will be quoted separately with client approval

- Exclusions: Drywall, paint, stucco, tile, concrete, stone repairs, or existing water damage

- Duration: 3-4 hours, 1 technician

- Warranty: Manufacturer - 6 years parts, 1 year labor; Conejo - 3 years labor

- Financing: 18 months at 0% interest available

- Qualifies for applicable utility rebates and federal tax credits (where available)

CC or check $4,396.49

Sales-Bill**Send Krista water heater label or upload to acct**

Install new 50 gal 10 year Bradford-

Drain and remove existing heater

Clean and prep area

Install new sheet metal, backing, grounding and straps

Install new Bradford 50 to todays code requirements

Run T&P line to an outside source

Light and test unit

Insulate piping

10 year manufacturer warranty on tank

6 year manufacturer warranty on parts and labor

CVHS provides a 1 year warranty on parts and labor

All pricing includes taxes and permit fees

Haul away all trash and debris

18 month 0% financing available

Please help customer move something’s in garage.

CC or Check $3725.00