Take a look at our past work!

Installation

Sales- Jesse Cruz

Turn- N/A

3TON upflow R801 furnace/coil, Innovair slim-line, NUVE thermostat

Total due - $12,400.00 *ACCT TO CALL H/O; TENANT OCCUPIED*

PER ANDREW:

Install 50 gallon water heater (still needs quote) Customer is H/O

Not a gated community

Aware of $87 service fee, WWR

Please call Barbara when you are on your way (805) 704-5600

Bradford White Skinny 40-gallon Water Heater InstallSold by Tony

**Please take a pic of the water heater label and send to Krista or upload to acct**

40-Gallon Gas Water Heater Replacement

Replacement of an existing 40-gallon gas water heater in a garage with no recirculation pump.

Location: Garage

Recirculation Pump: No

Tasks:

Preparation and Shutoff:

1. Shut off gas supply valve

2. Close main water supply

3. Drain existing water heater to empty tank

Removal of Existing Unit:

1. Disconnect gas line from heater

2. Detach cold and hot water supply lines

3. Remove and dispose of old unit per local regulations

New Water Heater Installation:

1. Position new 40-gallon unit with adequate clearance per code

2. Install new drain pan beneath unit

3. Connect new stainless steel water supply lines (cold and hot)

4. Install 1/4-turn ball valve on cold water inlet

5. Install expansion tank, adjusted to home water pressure (typically 50-60 PSI)

6. Fit new gas shutoff valve on gas line

7. Attach new flexible gas supply line with sediment trap

8. Secure unit with Unistrut mounting and earthquake straps

9. Reconnect to existing T&P relief valve exit point

10. Insulate water supply lines for efficiency

11. Install copper bonding wire from water lines to gas line for grounding

12. Cover base/stand with sheet metal for protection

Venting and Combustion:

1. Install venting per manufacturer’s specs (e.g., double-wall or single-wall as required)

2. Secure single-wall vent connections with 3 screws each

3. Verify adequate combustion air supply per code

Testing and Startup:

1. Pressure-test gas and water connections for leaks

2. Fill tank and purge air from lines

3. Test T&P relief valve operation

4. Light pilot, set temperature to 120°F (or per client preference), and confirm burner ignition

5. Validate full operational status

Cleanup and Final Steps:

1. Clear debris from work area

2. Haul away old unit for disposal

3. Conduct final inspection with client walkthrough

Notes:

- Estimate valid for 60 days from issuance

- Includes permit fees (if required)

- Unforeseen issues or additional work will be quoted separately with client approval

- Exclusions: Drywall, paint, stucco, tile, concrete, stone repairs, or existing water damage

- Duration: 3-4 hours, 1 technician

- Warranty: Manufacturer - 6 years parts, 1 year labor; Conejo - 3 years labor

- Financing: 18 months at 0% interest available

- Qualifies for applicable utility rebates and federal tax credits (where available)

**Amount to collect when done:** $3,294.00

Please call when on the way (818) 266-6250

Sales-TracyArrived to customers location due to low pressure and poor quality when two people are taking a shower or doing laundry anything running extreme drop edge and pressure pressure starts at 100 and when they turn the shower on it drops down to 40 this happens when a diaphragm in the pressure regulator is overcompensating for the pressure and you get a decrease of the whole house water pressure

CC or check $2261.00

Installation

Sales- Brice

Turn- N/A

add on 3 head mini split (Innovair)

Total for this portion - $19,500.00

FINANCING - $16,000.00 *Synchrony 7.99/73 months*COLLECT CC OR CHECK - $5,000.00

Insulation Monday

Insulation

Sales- Brice

Turn- n/a

Install approx. 864 blown-in insulation to R30 value

Total for this portion - $1,500.00

FINANCING - $16,000.00 *Synchrony 7.99/73 months*COLLECT CC OR CHECK - $5,000.00