Take a look at our past work!

Sales-Derek10/29 Derek to go back and install shower cartridge

**PLEASE TAKE A PICTURE OF THE WATER HEATER LABLE AND SEND TO KRISTA**

Shower cartridge price pfister ceramic

40-Gallon Gas Water Heater Replacement

Replacement of an existing 40-gallon gas water heater in a garage with no recirculation pump.

Location: Garage

Recirculation Pump: No

Tasks:

Preparation and Shutoff:

1. Shut off gas supply valve

2. Close main water supply

3. Drain existing water heater to empty tank

Removal of Existing Unit:

1. Disconnect gas line from heater

2. Detach cold and hot water supply lines

3. Remove and dispose of old unit per local regulations

New Water Heater Installation:

1. Position new 40-gallon unit with adequate clearance per code

2. Install new drain pan beneath unit

3. Connect new stainless steel water supply lines (cold and hot)

4. Install 1/4-turn ball valve on cold water inlet

5. Install expansion tank, adjusted to home water pressure (typically 50-60 PSI)

6. Fit new gas shutoff valve on gas line

7. Attach new flexible gas supply line with sediment trap

8. Secure unit with Unistrut mounting and earthquake straps

9. Reconnect to existing T&P relief valve exit point

10. Insulate water supply lines for efficiency

11. Install copper bonding wire from water lines to gas line for grounding

12. Cover base/stand with sheet metal for protection

Venting and Combustion:

1. Install venting per manufacturer’s specs (e.g., double-wall or single-wall as required)

2. Secure single-wall vent connections with 3 screws each

3. Verify adequate combustion air supply per code

Testing and Startup:

1. Pressure-test gas and water connections for leaks

2. Fill tank and purge air from lines

3. Test T&P relief valve operation

4. Light pilot, set temperature to 120°F (or per client preference), and confirm burner ignition

5. Validate full operational status

Cleanup and Final Steps:

1. Clear debris from work area

2. Haul away old unit for disposal

3. Conduct final inspection with client walkthrough

Notes:

- Estimate valid for 60 days from issuance

- Includes permit fees (if required)

- Unforeseen issues or additional work will be quoted separately with client approval

- Exclusions: Drywall, paint, stucco, tile, concrete, stone repairs, or existing water damage

- Duration: 3-4 hours, 1 technician

- Warranty: Manufacturer - 6 years parts, 1 year labor; Conejo - 3 years labor

- Financing: 18 months at 0% interest available

- Qualifies for applicable utility rebates and federal tax credits (where available)CC or Check $3354.00

Installation

Sales- james

Turn- Eric

Duct mod, cat walk

Total due - $3,100.00 (CC or check)

Install *ELECTRICAL PORTION 10/28 + 10/29

Sales- Owen

Generator Installation

Total for this portion - $18,200.00 (CC or CHECK)

InstallGenerator (PLUMBING PORTION)

Running gas linesTotal for this portion - $3,000.00 (CHECK)

Sales-TracyPLEASE UPLOAD PIC OF WATER HEATER LABEL OR SEND KRISTA A PIC PLEASE

Drain and remove the old water heater.

Install a new 40 gallon water heater.PROPANE water heater  

.

Install exsisting gas flex connector, water connectors, supply ball valve shut-off and quake strap.

Install expansion tank at supply line of water.

Hook T&P valve up to existing copper line.

Tax and permits are included in the price of cost.

6 year tank 6 year parts and 1 year labor warranty - 40 Gal Kit - Bradford Water Heater 40 GalCollect CC or check $2500.00

Installation **9AM START TIME. **745AM PRE **WAITING ON PRE FOR SYSTEM SIZING

Sales- Ralph

Turn- Fernando

Horizontal Bosch air handler, BOVA15 heat pump, swapping existing mini split condenser with customer supplies.

Total due - $14,729.00 (BILL OUT)