Take a look at our past work!

Install

Sales- Jimmy50 gal water heater replacementTotal due- $3,450.00 (CC or CHECK)

Drain Repair and [accessible] Water Line ReplacementSold by Tony

Waste and Overflow ABS

Install or replace an ABS waste and overflow assembly for a bathtub to ensure proper drainage and prevent leaks, potentially involving drywall or stucco cutting for access in residential or commercial bathrooms. The ABS (acrylonitrile butadiene styrene) assembly, including the drain, overflow pipe, and fittings, directs wastewater to the sewer and prevents sewer gas backup, offering durability and corrosion resistance. This service addresses clogged, leaking, or outdated assemblies, improving drainage efficiency and maintaining hygiene. The process may require cutting drywall or stucco to access plumbing, with Conejo excluding repairs to these finishes. Installation ensures watertight connections, compliance with plumbing codes, and seamless integration with the bathtub, enhancing functionality and preventing water damage.

Location: Interior (Bathroom, Behind Bathtub)

Tasks:

Preparation:

1. Verify bathtub and plumbing layout to confirm ABS waste and overflow compatibility.

2. Shut off water supply and remove old waste and overflow assembly, if applicable.

3. Set up work area with tools (pipe cutter, ABS cement, drywall saw, PPE) and protective coverings.

Access and Removal:

1. Cut drywall or stucco, if necessary, to access existing waste and overflow plumbing, minimizing damage.

2. Remove old assembly, inspecting P-trap and drain lines for clogs or damage.

3. Clean installation area and verify subfloor condition, noting repairs if needed.

ABS Assembly Installation:

1. Install new ABS waste and overflow assembly, connecting drain and overflow pipe to P-trap.

2. Apply ABS cement to joints for watertight, durable connections, per manufacturer guidelines.

3. Secure overflow cover and drain flange to bathtub, ensuring proper alignment and sealing.

Testing:

1. Restore water supply and fill tub to test drainage and overflow functionality.

2. Check for leaks at all connections and confirm no sewer gas odors.

3. Verify proper drainage speed and overflow capacity to prevent backups.

Cleanup and Final Steps:

1. Clean work area and dispose of old assembly or debris per local regulations.

2. Provide client with assembly specifications and maintenance recommendations.

3. Conduct walkthrough to demonstrate proper drainage and note drywall/stucco repair needs.

Notes:

- Installs durable ABS waste and overflow, potentially requiring drywall or stucco cutting.

- Conejo does not repair drywall, paint, or stucco; client responsible for cosmetic repairs.

- Additional P-trap or drain line repairs quoted separately if needed.

- Advise client to monitor drainage and check for leaks periodically.

- Estimate valid for 60 days from issuance

- Includes permit fees (if required)

- Unforeseen issues or additional work will be quoted separately with client approval

- Exclusions: Drywall, paint, stucco, tile, concrete, stone repairs, or existing water damage

- Duration: 2-4 hours, 1-2 technicians

- Warranty: 2 years parts, 1 year labor

- Financing: 18 months at 0% interest available

Partial Home Repipe Copper

Partial repipe of home plumbing using copper piping to replace damaged or outdated pipes in specific areas, ensuring durability and water quality.

Lines in that bathroom that are exposed are to be rebuild in pex and secured to the studs.

Insulate hot lines.

We can move line out or the way of drain lines so that can be secured properly and elimated further issues.

Location: Varies

Tasks:

Assessment and Preparation:

1. Inspect existing plumbing to identify areas for repipe.

2. Shut off main water supply to home.

3. Set up work area with drop cloths and tools (pipe cutter, torch, solder).

Pipe Removal:

1. Cut out damaged or outdated pipe sections (e.g., galvanized, old copper).

2. Dispose of old piping per local regulations.

3. Cap open lines to prevent debris entry.

Copper Installation:

1. Route new copper piping (1/2-inch or 3/4-inch, per demand) through walls or floors.

2. Solder copper fittings (elbows, tees, couplings) per code standards.

3. Secure piping with hangers or straps, maintaining proper slope.

Testing:

1. Turn on water supply and pressure-test new lines for leaks.

2. Run water through fixtures to verify flow and pressure.

3. Inspect all solder joints with leak detector solution.

Cleanup and Final Steps:

1. Wipe down work areas and remove debris.

2. Dispose of old materials per local regulations.

3. Conduct client walkthrough to demonstrate functionality.

Notes:

- Copper ensures long-term durability and water purity.

- Wall or floor access repairs quoted separately.

- Advise client to monitor water pressure post-repipe.

- Estimate valid for 60 days from issuance

- Includes permit fees (if required)

- Unforeseen issues or additional work will be quoted separately with client approval

- Exclusions: Drywall, paint, stucco, tile, concrete, stone repairs, or existing water damage

- Duration: 1-2 hrs, 1-2 technicians

- Warranty: 5 years parts and labor

- Financing: 18 months at 0% interest available

AMOUNT TO COLLECT: $4,832.00

Please call 805-807-1144

Installation **9AM START TIME

Sales- Jesse

Turn- N/A

ducting 3 runs, Air Scrubber

Total for this portion - $4,200.00 (CC)

Insulation

Sales- Jesse Cruz

Turn- N/A

Remove approx. 400 sq. ft. of BATT insulation.Perform air seal.Install approx. 400 sq. ft. of blow-in insulation to R38 value

Total for this portion - $2,290.00 (CC or CHECK)

Install

Sales- StacieTurn- N/AInstall new 50 gallon water heater. Like for Like.Total due - $$3,294.00 (CC or CHECK)

Install-

Sales: John Villa50 gallon water heater replacementTotal due - $3,294.00 (CC or CHECK)