Take a look at our past work!

Sales-Tracy**Send Krista water heater label picture or upload to acct**

12/31 Tracy Tracy needs to go back and and change the hose bib, take pics, and collect final balance

We will install a 50 gallon water heater with addition 10 year Drain and remove the old water heater.

Install a new 50 gallon water heater.

Install a new drain pan.

Sheetmetal the base.

Install a new gas flex connector, water connectors, supply ball valve shut-off and quake strap.

Install expansion tank at supply line of water.

Hook T&P valve up to existing copper line.

Tax and permits are included in the price of cost.

6 year tank 6 year parts and 1 year labor warranty

CC or Check $4,784.00

Sales-John V.**Please send Krista a pic of the water heater label or upload to acct**

Replace 11 year old 50 gallon water heater in laundry room closet and bring up to current code requirements Drain and remove the old water heater.

Install a new 50 gallon water heater.

Install a new drain pan.

Sheetmetal the base.

Install a new gas flex connector, water connectors, supply ball valve shut-off and quake strap.

Install expansion tank at supply line of water.

Hook T&P valve up to existing copper line.

Tax and permits are included in the price of cost.

6 year tank 6 year parts and 1 year labor warranty

CC or Check $3537.00

Sales-Kevin**Please send picture of water heater label or upload to acct**75-Gallon Gas Water Heater Replacement

Replacement of an existing 75-gallon gas water heater in a garage with no recirculation pump.

Location: Garage

Recirculation Pump: No

Tasks:

Preparation and Shutoff:

1. Shut off gas supply valve

2. Close main water supply

3. Drain existing water heater to empty tank

Removal of Existing Unit:

1. Disconnect gas line from heater

2. Detach cold and hot water supply lines

3. Remove and dispose of old unit per local regulations

New Water Heater Installation:

1. Position new 75-gallon unit with adequate clearance per code

2. Install new drain pan beneath unit

3. Connect new stainless steel water supply lines (cold and hot)

4. Install 1/4-turn ball valve on cold water inlet

5. Install expansion tank, adjusted to home water pressure (typically 50-60 PSI)

6. Fit new gas shutoff valve on gas line

7. Attach new flexible gas supply line with sediment trap

8. Secure unit with Unistrut mounting and earthquake straps

9. Reconnect to existing T&P relief valve exit point

10. Insulate water supply lines for efficiency

11. Install copper bonding wire from water lines to gas line for grounding

Venting and Combustion:

1. Install venting per manufacturer’s specs (e.g., double-wall or single-wall as required)

2. Secure single-wall vent connections with 3 screws each

3. Verify adequate combustion air supply per code

Testing and Startup:

1. Pressure-test gas and water connections for leaks

2. Fill tank and purge air from lines

3. Test T&P relief valve operation

4. Light pilot, set temperature to 120°F (or per client preference), and confirm burner ignition

5. Validate full operational status

Cleanup and Final Steps:

1. Clear debris from work area

2. Haul away old unit for disposal

3. Conduct final inspection with client walkthrough

Notes:

- Estimate valid for 30 days from issuance

- Permit fees, if required, are included as a separate line item

- Unforeseen issues or additional work will be quoted separately with client approval

- Exclusions: Drywall, paint, stucco, tile, concrete, stone repairs, or existing water damage

- Duration: 4-5 hours, 1 technician

- Warranty: Manufacturer - 6 years parts, 1 year labor.

- Qualifies for applicable utility rebates and federal tax credits (where available)

CC or Check $5459.00

Sales- Stacie**PLease send Krista the water heater label picture or upload to acct**Replace existing tank water heater with new Bradford white 40 gallon tank water heater in garage location.

Install new stainless steel water heater flex connectors.

Install new ball valve shut off.

Install new thermal expansion tank.

Install new temperature/pressure relief valve and drain to exterior.

Install new water heater earthquake strapping.

Install new unistrut mounting system.

Install new gas shut off valve, gas flex, and sediment trap.

Install new sheet metal base and front on stand.

Install new water heater drip pan.

City permits included.

WARRANTY INFORMATION:

• Conejo Plumbing & Rooter:

-3 years for parts & labor.

• Bradford White:

- 1 year labor / 6 year parts & tank.

- Additional 2 & 4 year parts & tank warranties are available if purchased same day as water heater installation.

- Warranty registration: https://warrantycenter.bradfordwhite.com

• Thermal Expansion Tank:

- 5 year part warranty; replacement recommended every 5 years.

FINANCING OPTIONS:

• 18 months 0% financing no terms is available.

DISCLAIMER:

• Conejo - Plumbing Division is not responsible for the repair or replace of drywall, paint, stucco/plaster, carpet/flooring, or existing water damage. All such repairs & replacements are the sole responsibility of the property owner/property manager.

• For any projects requiring specialized licensing and/or qualifications, Conejo Services is able to provide estimates for the following divisions:

- Plumbing

- HVAC

- Insulation

- Electrical

- Roofing

Please note that all work must be performed by qualified professionals to comply with safety requirements, local regulations & company/industry standards.

• All estimates & proposals provided by Conejo - Plumbing Division are valid for a period of six months from the date of issuance. After this period, any estimates or proposals are subject to change based on market conditions and pricing. It is recommended to review and confirm any estimates or proposals with Conejo - Plumbing Division if more than six months has passed since the date of issuance.

CC or Check $3294.00

Insulation **THREE DAY PROJECT; 1/26-1/28

Sales- Chip

Turn- N/A

INSULATION-

Remove approx. 1,746 sq. ft. of BATT insulation (with 3" of Cellulos on top.Perform air seal.Perform sanitization.Install approx. 1,746 sq. ft. of blow-in insulation to R38 value.HVAC TECH-Install surge protector for A/CCHACHO/JODY-Duct cleaning approx 9-10 runs.TOTAL DUE FOR ALL - $11,450.00 (CC OR CHECK)