Take a look at our past work!

Sales-TonyEarthquake Gas Safety Valve 1-1/2" Horizontal

Install a 1-1/2-inch horizontal earthquake gas safety valve on the gas supply line to automatically interrupt gas flow during a seismic event, mitigating the risk of gas leaks and fire hazards. The valve detects ground accelerations above a preset threshold (typically 0.3g, per ASCE 25-97 standards), triggering a mechanical shut-off to isolate the gas supply. Designed for horizontal gas lines in commercial or industrial settings, this valve ensures compliance with seismic safety codes. The installation minimizes disruption to existing gas systems, enhances safety for occupants, and is essential for earthquake-prone regions.

Location: Exterior (Gas Meter or Horizontal Run)

Tasks:

Preparation:

1. Confirm gas line size (1-1/2-inch) and suitability for horizontal valve installation.

2. Shut off gas supply at the main meter and verify no open flames or sparks.

3. Set up work area with tools (pipe wrench, thread sealant, level, PPE) and barriers.

Valve Installation:

1. Identify optimal installation point on horizontal gas line, ensuring accessibility and code compliance.

2. Cut gas pipe using a pipe cutter and deburr edges for a smooth connection.

3. Install 1-1/2-inch earthquake gas safety valve with threaded connections, using thread sealant for gas-tight fit.

4. Verify valve is level in horizontal orientation to ensure accurate seismic detection.

Connection and Sealing:

1. Connect valve to upstream and downstream gas lines using fittings (e.g., unions or couplings).

2. Apply pipe dope or PTFE tape to threaded connections to prevent leaks.

3. Secure valve to structure with brackets to prevent movement, per manufacturer guidelines.

Testing:

1. Restore gas supply and test for leaks using a gas detector or soapy water solution at connections.

2. Simulate seismic trigger (if permitted) to confirm valve shut-off functionality.

3. Verify valve resets correctly after testing, following manufacturer instructions.

Cleanup and Final Steps:

1. Clean work area and dispose of debris per local regulations.

2. Attach valve operation instructions and warning tags for client reference.

3. Conduct client walkthrough to explain valve function, reset process, and maintenance.

Notes:

- Automatically shuts off gas during seismic events to prevent leaks and fires.

- Requires annual inspection to ensure proper function; client advised to schedule maintenance.

- Gas line modifications or meter relocation quoted separately if needed.

- Estimate valid for 30 days from issuance

- Permit fees, if required, are included as a separate line item

- Unforeseen issues or additional work will be quoted separately with client approval

- Exclusions: Drywall, paint, stucco, tile, concrete, stone repairs, or existing gas line damage

- Duration: 2-4 hours, 1 technician

- Warranty: 5 years parts and labor

Pressure Regulator 1-1/4"

Installation of a 1-1/4- inch pressure regulator to control water pressure, protecting plumbing systems in large homes or commercial settings.

Location: Outside

Tasks:

Preparation:

1. Shut off main water supply to home.

2. Locate installation point near main water line (1-1/4-inch pipe).

3. Set up work area with tools (pipe cutter, wrench, sealant).

Regulator Installation:

1. Cut into main water line and install 1-1/4-inch threaded fittings.

2. Install pressure regulator, ensuring correct flow direction.

3. Apply pipe tape to threads and tighten connections.

Testing and Adjustment:

1. Turn on water supply and check for leaks at connections.

2. Adjust regulator to optimal pressure (50-60 PSI, per home needs).

3. Verify pressure at fixtures using a pressure gauge.

Cleanup and Final Steps:

1. Wipe down regulator and piping to remove debris.

2. Dispose of packaging per local regulations.

3. Conduct client walkthrough to explain operation.

Notes:

- Prevents damage from high pressure; adjustable for home needs.

- Existing pressure issues may require additional repairs.

- Advise client to check pressure annually.

- Estimate valid for 30 days from issuance

- Permit fees, if required, are included as a separate line item

- Unforeseen issues or additional work will be quoted separately with client approval

- Exclusions: Drywall, paint, stucco, tile, concrete, stone repairs, or existing water damage

- Duration: 1-2 hours, 1 technician

- Warranty: 1 year parts and labor

CC or Check $3494.00

Sales-Jimmy**Send Krista water heater label or upload to acct**Conejo home services

US National Parks Service

12896 Yerba Buena Road

Malibu, CA 90265

January 08, 2026

Scope of Work

Remove existing 30-gallon water heater and replace with new 30-gallon propane water heater. Includes basic reconnection to existing plumbing, gas line, venting, and temperature & pressure relief valve. No permit included. No code upgrades included. Existing connections assumed to be in acceptable condition.

Terms & Conditions

Estimate vali for 30 days

No permit included

No warranty on existing plumbing, gas, or venting

Additional repairs or modifications not included unless noted

Payment due upon completion (unless otherwise agreed)

CC or Check $2499.99

Sales-BillArea Drain Repair/Replacement

This include the following

After action reports multiple breaks in area drainage on

- attaching to existing catch basin just beyond fence

- we will attach a new pipe to this part with proper fittings

- we will use new pvc and fittings

-trenching of dirt

- length of pipe is 90 feet from catch basin to street exit

-includes glue fittings , this is optimal for keeping roots out

-includes schedule 40 drain pvc pipe

-includes tunnel under side walk to avoid jack hammering city side walk

-includes tying into down spout on right side of home near edge of home in the front

-includes bush removal and put back when completed

-includes put back of dirt and testing of drainage

15 year Conejo warranty on piping Cvha replaces

**excludes any other drainage not mentioned above

- does not include any drains or drainage around pool area or under stone walk way

Does not include any concrete, drywall patch , paint or stucco repair 

CC or Check $$6,353.00

Sales-JimmyScope of Work

Kitchen Drain Re-Route

Reroute existing kitchen drain line through the exterior of the home.

Properly secure, grade, and vent drain line per applicable plumbing codes.

Laundry Tub Tie-In

Connect (grab and tie in) existing laundry tub drain to newly rerouted drain line.

Bathroom Re-Drain

Re-drain one (1) full bathroom, including all necessary drain piping to ensure proper flow and function.

Testing

Test all newly installed drain lines for proper operation and leaks upon completion.

Materials & Labor

PVC piping and fittings

Necessary hangers, supports, and connections

Skilled labor for demolition limited to plumbing access only

Jobsite cleanup related to plumbing work only

Warranty

25-Year Warranty on Parts and Labor

Warranty covers defects in materials and workmanship related to the plumbing installation.

Warranty does not cover misuse, abuse, settling, or issues unrelated to installed plumbing components.

Exclusions & Limitations

The contractor cannot be held responsible for:

Concrete cutting, repair, or patching

Drywall repair or patching

Stucco repair or patching

Painting, tile, flooring, or cosmetic repairs

Any work outside the stated plumbing scope

All patching, restoration, and cosmetic repairs are the responsibility of the homeowner or a third-party contractor.

CC or Check $12634.40

Sales-Jimmy**For this one specifically the wife is allergic to WiFi. They are asking everyone working on the job site to leave the phones in the car while working on the property.**

**AMERICAN SHOWING UP ON WEDNESDAY 1/28 9AM-10AM**

One bathroom re-drain with linerConejo home services will open up in front of toilet and excavate down 3 feet to properly gain access to original cast-iron material under slab of home.

Once original cast materials exposed, we will remove original material and install scheduled 40 PVC material for all fixtures in bathroom which includes one toilet, one sink, and one shower.

When the addressing kitchen line we will open up a section in front of kitchen sink to gain access to kitchen line and a additional hole in bathroom in front of toilet to allow trench less operator to perform pipe burst method using high density polyethylene material 2 inch inner diameter.

When addressing laundry line will open up section in back of laundry unit in stucco ,90° fitting outside of wall and excavate 2 feet over attach to main sewer using schedule 40 PVC material.

After scope of work has been performed, we will backfill and compact soil properly, but cannot be held responsible for any type of concrete patching

Conejo home services cannot be held responsible for any type of flooring, concrete, stucco, drywall, landscaping, masonry, work landscaping, structured home, or existing plumbing fixtures.

Job includes a 25 year warranty on parts and labor

Pipe burst and linerConejo home service will excavate at exit home to probably gain access to main sewer or replacement.

Additional hole proper 6 feet to allow trench less operator to perform trench less replacement “ pipe burst” process 60 feet from exit home to property line using high density polyethylene material.

After polyethylene material has been installed, we will in line using a cure in place liner from property line up to city connection and center of street using five mil textile material with epoxy 40 feet.

Once line is installed we will make proper connections using 4 inch strong back fittings with schedule 40 PVC material.

Once scope of work has been performed We will backfill and compact soil property.

Job includes a 25 year warranty on parts and labor

Conejo home services cannot be held responsible for any type of flooring, concrete, stucco, drywall, landscaping, masonry, work landscaping, structured home, or existing plumbing fixtures.

CC or Check $26,950.00