Take a look at our past work!

Master Work Order / Special Information

• Notes:
• Siding, Fascia, Soffits/ Gutters/ Windows, Doors/ Skylight
• SIDING, FASCIA, SOFFITS -
• (27 SQ) Siding removal & Hardie Install (MONTEREY TAUPE)
• House wrap
• (511 LF) 4" & 6" Trim with Flashing Install (WHITE)
• (92 LF) 8",10",12",16" Trim with Flashing Install (WHITE)
• (520 LF) Vinyl Soffit Install (WHITE)
• (542 LF) Fascia Install (WHITE)
• (243 LF) Gutter removal & dipose
• GUTTERS -
• (268 LF) 6" K-Style Install (WHITE)
• (35 LF) 2nd story charge
• (12) 6" 1st story downspouts
• (1) 6" 2nd story downspouts
• (6) 6" Mitres
• WINDOWS & DOOR -
• (20) Remove & Install new windows
• (2) Slider Door Install & Trim
• SKYLIGHT-
• (1) Cut in & Install new Skylight

Master Work Order / Special Information

• Notes:
• TPO Flat Roof Replacement (White) for back flat roof
• TPO Flat Roof Installation: 5SQ
• Existing TPO Removal
• HD Board Installation
• Apply Flat roof water cut off
• (6) 3" Weldable Drip Edge
• (1) 10' Termination bar installation
• Full Roof Replacement (Main House and Garage)
• 
  
• Asphalt shingle Installation (Main House)
• O/C True Definition (Estate Grey): 46SQ
• (1) Layer of Removal
• 6SQ (3/12 - 8/12)
• 40SQ (9/12 - 12/12)

Master Work Order:

40 SQ shingle, 7 SQ TPO (Tamko Titan XT- Rustic Black).

delete 2 power vents.

flash 2 chimneys (black).

cut in ridge vents.

(2) 4-N-1 boots, paint black.

4PC plywood- delete 3 skylights.

remove TPO @ chimney.

**first week of May requested by H/O**

Master Work Order / Special Information

• Notes:
• Partial Roof Replacement (NOT DOING BREEZEWAY OR GARAGE)
• Asphalt shingle roof installation
• Tamko Heritage (Rustic Black): 21SQ
• (1) Layer of cedar removal
• (1) Layer of shingle removal
• Full Re-deck
• 8SQ (3/12 - 8/12); 13SQ (9/12 - 12/12)
• (3) chimney flashing
• (2) chimney cricket installation
• **See Photos** cutting and removal of pipe
• There is a pipe on the roof next to one of the chimneys
• access if cutting the pipe is possible and cut to the roof line
• build chimney cricket over pipe and to existing chimney
• (Black trim coil)
• **See Photos** Cover the hole in the siding closest to the pipe and chimney
• UseStep Flashing (black trim coil to match chimney flashing and cricket) and PVC to cover hole in siding
• install trim board as needed

Master Work Order:

*We are doing the Main Inn AND the Garage: We need tarps for both the Inn and Garage*

MAIN INN:

36SQ F-Wave Shake (Castlewood Brown); cedar removal.

(3) chimneys.

(113) plywood/redeck.

step flashing as needed.

re-use existing copper flashing.

re-use existing copper w-valley.

*Have copper on hand for repair/replacement as needed*

GARAGE:

18SQ F-Wave Shake (Castlewood Brown); cedar removal.

(2) 3" Lifetime boots, paint black.

(58) plywood/redeck.

(80LF) step flashing.